Finalize Gel Top UV 15ml

DESCRIPTION: High-gloss top coat gel for use with 3-step semi-permanent gel polish systems. Cures under LED/UV lamps. DIRECTIONS FOR USE:
15 mL Gloss Top Gel for use with 3-step semi-permanent gel polish systems. Cures under an LED/UV lamp (Step 3).

Steps for Applying Top Gel (Natural and Acrylic Nails)
1. Prepare the nail by disinfecting it and gently buffing the surface with a 180-grit nail file to remove the natural shine. Remove all dust before application.
2. Apply a nail primer to dehydrate the natural nail and help ensure longer-lasting adhesion of the gel application.
3. Apply a thin layer of Base Gel and cure under an LED lamp for 1 minute.
4. Apply a thin first coat of Gel Color and cure under an LED lamp for 1 minute. Repeat this step if additional coverage is needed.
5. Apply a thin layer of Top Gel to seal the manicure, then cure under an LED lamp for 1 minute.

Note: Top Gel Base leaves an inhibition (sticky) layer after curing. Remove this layer using a lint-free wipe or gauze dampened with gel cleanser.

IMPORTANT NOTES:
Keep approximately 1 mm of space between the product and the cuticle and make sure to seal the free edge of the nail to help prevent lifting and improve durability. It is recommended to cure the four fingers separately from the thumb. Both thumbs can be cured at the same time.

Once the gel has cured, avoid touching the nail. Wait a few seconds for the gel to fully stabilize as it adjusts to room temperature to help maintain its high-gloss finish. While the nails are cooling, you may apply cuticle oil to each finger. By the time you’ve finished applying it, the gel will have fully stabilized, and you can gently massage the cuticles to moisturize and nourish the surrounding skin.

Applying too much product may prevent the gel from curing properly. For best results, shake the bottle well before use, apply each coat in a thin layer, work quickly, and cure each layer under an LED lamp for 30 seconds to 1 minute before applying the next coat.